Press the button on the radio-controlled socket for approx. 3 seconds and release it again.
release it again. The function light now flashes for
approx. 30 seconds (learning mode).
Now you can press one of the "On" buttons (left side of the hand-held transmitter) on the hand-held transmitter to assign the channel.
IMPORTANT: Make sure that you do not press the button on the radio-controlled socket for longer than 3 seconds. If you press for too long (approx. 6 seconds), you will activate delete mode. Release the button after exactly 3 seconds.
Also, make sure the remote control is powered by the battery. You can tell this is the case if the LED on the remote control lights up when you press the buttons. If this is not the case, insert a new, compatible battery. Be sure to use the correct type.